Dim/Brighten Control For Any Type Of Light

Replace your standard lighting switches with UPB compatible dimmer switches with the PCS HAI UPB Wall Switch Dimmer, 600W/5A. This UPB dimmer switch can control dimmable light sources, including LED lights, CFL lights, fluorescent lights, inductive loads, incandescent lights and halogen lights.

- Replaces an existing wall switch to control dimmable light fixtures (up to 600W)
- Issues On/Off or Dim/Brighten commands with Single Tap/Double Tap or Hold/Release commands
- LED status light indicates On/Off status of connected lights
- Auto-Off Timer: Choose a max amount of time the light stays on (1 to 240 minutes)
- Air-Gap Switch Lever allows for safe switch installment and light bulb replacement
- Capable of working with up to 2 auxiliary switches for multi-way lighting applications

These switches offer smoother dimming throughout the light’s range, and an adjustable minimum dimming level to reduce drop-off and prevent flickering. A multi-color (Blue, Magenta, Red or Off) LED on top of the rocker guides you through the dark.
How It Works
Tapping the rocker switch turns lights on/off, while holding it down dims/brighten lights. Separate brightness levels (between 0 to 100 percent) are chosen for single-tap and double-tap events. Sixteen selectable fade rates (instant-on to one hour) give you absolute flexibility.
Compatible With Scene Lighting

Each switch may become a member of 16 individual scenes, 250 different scenes per system. Switches can store a pre-set lights-on level and fade rate for each scene, allowing you to install a sophisticated lighting system at a fraction of typical costs.
PulseWorx Lighting Control System
These switches are designed to be an integral part of a complete PulseWorx Lighting Control System. Like all PulseWorx devices, the Dimmer Wall Switches use UPB powerline communication technology to reliably communicate with other UPB-compatible devices over your existing electrical wires. No new wiring is required, making PulseWorx perfect for retrofit applications. When initial configuration is complete, a single push of a button is all you need to simultaneously activate any group of lights (or virtually anything else that connects to AC power wiring) throughout your house.

Contents
- Wall Switch Dimmer
NOTE: Wallplate not included.
UPB PulseWorx Lighting Control System
An integral part of a complete PulseWorx Lighting Control System, this device uses the patented UPB powerline communication technology (invented by PCS) to reliably communicate with any other UPB-compatible devices over the existing house electrical wires. No new wires are necessary, thus making PulseWorx perfect for retrofit situations. When initial configuration is complete, a single push of a button is all you need to activate any group of lights (or virtually anything else that connects to AC power wiring) throughout the house simultaneously.



















Reviews
There are no reviews yet.